Beko METPOINT BDL portable Instructions For Installation And Operation Manual page 35

Main menu  Settings  Sensor settings  C1  Text field type
See also Chapter 7.3.2.1.2.8 Konfiguration von Analogsensoren
Main menu  Settings  Sensor settings  C1  Text field unit
Main menu  Settings  Sensor settings  C1  Right arrow (2
Important:
The inner diameter should be entered as exactly as possible, since, otherwise, the measuring results
will be falsified!
No uniform standard exists for the inner diameter of the pipe!
(Please ask the manufacturer or, if possible, check the measurements yourself!)
®
METPOINT BDL portable
Operation METPOINT® BDL portable
After having pressed the
following options can be chosen.
(siehe Bild)
A preset selection of suitable units.
page) Text field diameter
nd
Important:
Here, the inner diameter
be entered in the event that it was not au-
tomatically correctly set.
Here, 27.5 mm, for example, are entered for
the inner diameter.
Type text field, the
of the flow pipe can
35