Beko METPOINT BDL portable Instructions For Installation And Operation Manual page 29

Mobile hand-held measuring device

Hide thumbs Also See for METPOINT BDL portable:

Table of Contents

Main menu  Settings  Sensor settings  C1

Further configuration possibilities regarding sensors, see Chapters 12.2.2.5 to 12.2.2.8!

See also Chapter 7.3.2.1.2.7 Textfelder beschriften und einstellen

Note:

After having confirmed by

accepted.

Caution:

Reference temperature and reference pressure (setting ex works 20°C, 1000 hPa):

All the volume flow (m³/h) and consumption values (m³) that are indicated on the display refer to 20°C

and 1000 hPa (according to ISO 1217 suction condition).

Alternatively, 0°C and 1013 hPa (=standard cubic meter according to DIN 1343) can also be entered

as the reference. Under no circumstances must the operating pressure or the operating temperature

be entered into the reference conditions!

METPOINT

BDL portable

OK,

the lettering is switched to black again. The values and settings have been

Operation METPOINT® BDL portable

Now, a

name

can be entered.

Subsequent to marking and confirming by OK,

the configuration of the sensor is completed.

Table of Contents