Beko METPOINT BDL portable Instructions For Installation And Operation Manual page 77

Main menu  Settings  Sensor settings  Virtual channels  V1  1
(°C)
The same procedure applies analogously to all operands (1
®
METPOINT BDL portable
(% RH)
C1d
C1d (% RH)
Virtual channels (optional)
operand  C1
st
By pressing a hardware or virtual channel but-
ton, e.g. I1, a selection list will open, showing
the measuring channels or measured values
that are available per channel, including de-
fined virtual channels.
By pressing the desired channel button, e.g.
C1b, the selection is accepted.
st nd
operand, 2 operand, and 3
If the Const. value button was pressed, the
value needs to be determined via the numeric
keypad. By pressing the
is accepted.

By means of buttons and
be corrected.

Button erases the last character
Button Clr erases the entire value
rd
operand).
OK button, the value
Clr, the values can
77