Cleaning; System Overview; About Metpoint ® Bdl Portable - Beko METPOINT BDL portable Instructions For Installation And Operation Manual
Mobile hand-held measuring device
Hide thumbs
Also See for METPOINT BDL portable:
Table of Contents
Advertisement
12.3.2.4.2 Cleaning
Main menu Settings Cleaning
12.3.2.4.3 System overview
Main menu Settings System overview
22.3 °C
7.83 V
5.05 V
5,01
10
12.3.2.4.4 About METPOINT
Main menu Settings About METPOINT
®
METPOINT
BDL portable
®
BDL portable
®
BDL portable
Short description of the
version,
METPOINT
Under
ferent functions, if this was not done during the
ordering.
Operation METPOINT® BDL portable
This function can be used to clean the
touch panel during the running measure-
ments.
If one minute does not suffice for the clean-
ing process, the procedure can be repeated
at all times.
If the cleaning process is completed before,
it can be stopped by pressing the
press-for-canceling
button for one to two
seconds.
The
system overview
menu item provides
information on the applied voltages and
currents of the individual and the entire
channels,
as well as on the voltage supply
of the
power supply
units.
Moreover, one can always see, by means
of the
operating
hours, for how long the
®
METPOINT
BDL portable was in operation
on the whole.
hardware
and
the
serial
®
BDL portable.
options,
you can also acquire two dif-
Long-
and
software
number
of
the
61
Advertisement
Table of Contents
