Sprockets Installation - Deda Elementi ZERO2DB User Manual

WARNING: for Tubeless tire installation carefully read the instructions of the tire and
tubeless conversion kit manufacturer.
WARNING: Never exceed the maximum inflation pressure recommended by the
wheels manufacturer as indicated in this user's manual. Excessive tire pressures
could damage the rim structure causing serious accident and injury for the user.
WARNING: Tire installation requires a specific experience of the product, in case
of doubts please contact an official Deda Elementi dealer or a qualified bicycle
technician. During tire installation don't use tools or tire lever that can fold, damage or
make the rim edge fragile. An incorrect tire installation can cause serious accidents
and injury for the user.

SPROCKETS INSTALLATION

Deda Elementi wheels are available with Shimano® 10-11 speed, Sram® 10-11-12
speed and Campagnolo® 10-11-12 speed cassette. Read and carefully follow the
installation instructions of the sprockets. The rear wheel with Shimano® freehub
body is supplied with a 1.80mm aluminum spacer that is intended to be used with
Shimano® /Sram® 10 speed cassette only . Please don't use 1.80mm spacer with
11 speed cassette.
Sram 12 speed groupset requires the use of the XD-R freehub body compatible,
available as spare part (part. No. WD17XDRSL).
Wheel Type Freehub Cassette Compatibility
Shimano/Sram Sram 12s* Shimano/Sram 11s Shimano/Sram 10s +
dist. 1.80mm
Campagnolo Campagnolo 12s Campagnolo 11s Campagnolo 10s
*with XD-R compatible freehub body
8