Page 2
Since specific tools and experience are necessary for proper installation, it is recommended that the product be installed by an official Deda Elementi dealer or a qualified bicycle technician.
If any bicycle fall or accident occur, stop riding the wheels and have them inspected carefully by an official Deda Elementi dealer or a qualified bicycle technician. Frequently check the status of the wheels parts subjected to wear and if necessary make the maintenance and/or parts replacement through the official Deda Elementi dealers.
Warranty policy. The Warranty is valid for the purchase of an original Deda Elementi product only. 2.1 LIMITS OF WARRANTY In case of sale or product cession, the Warranty will be considered valid for a two years period only from the original purchase.
The Wheels package you have just purchased contains the following items: The wheels User’s Manual Rim Tapes TECHNICAL SPECIFICATIONS: Wheels Model ZERO2DB 10s Shimano / Sram (with 1.80 mm spacer) 11s Shimano / Sram Compatibility cassettes *12s Sram **10-11-12s Campagnolo...
TIRES Deda ZERO2DB wheels are designed to use clincher tires with inner tubes or Tubeless tire. The Tubeless conversion kit is not included into the wheels box. Check tires and inner tubes dimensions according to the rim technical specifications included in this user’s manual.
WARNING: Tire installation requires a specific experience of the product, in case of doubts please contact an official Deda Elementi dealer or a qualified bicycle technician. During tire installation don’t use tools or tire lever that can fold, damage or make the rim edge fragile.
WARNING: Disc brake rotor installation requires a specific experience of the product. In case of doubts please contact an official Deda Elementi dealer or a qualified bicycle technician. An incorrect rotor installation can cause serious accidents and injury for the user.
Elementi dealer or a qualified bicycle technician. An incorrect wheels installation can cause serious accidents and injury for the user. Deda ZERO2DB wheels are pre-assembled from the factory with Thru- axle locking system (Front 12x100, Rear 12x142). The Thru-axles are not included into the wheels package.
Page 11
8.1 CONVERSION END CAPS KIT MOUNTING Front hub Remove the pressure end caps installed on the front hub (standard TA 12x100 mm) and replace them with those you need (QR 100 mm, TA 15 mm) Install the end cap with the smaller flange diameter (1) on the disc brake rotor side and the one with the bigger flange diameter (2) on the opposite side Make sure the washer (3) is correctly placed in its seat on the end cap (4) before inserting caps into the hub...
Deda Elementi dealer. For any intervention or replacement parts, only original Deda Elementi spare parts have to be used in order to guarantee the product quality and the warranty maintaining.
Page 14
26010 Campagnola Cremasca (CR) - Italia Phone +39 0373 750 129 Fax +39 0373 751 105 www.dedaos.com.tw Deda OS No.8, Lane 150-30, Sec. 3, Xitun Rd., Xitun Dist. Taichung City 407, Taiwan (R.O.C.) tel: +886-4-24623436 fax: +886-4-24623430 Deda Elementi USA dedausa@dedaelementi.com #ridededa...
Need help?
Do you have a question about the ZERO2DB and is the answer not in the manual?
Questions and answers