Fitting The Wheels On The Frame - Deda Elementi ZERO2DB User Manual

FITTING THE WHEELS ON THE FRAME

WARNING: Since specific experience is necessary for proper wheels installation, in
case of doubts it is recommended that the product be installed by an official Deda
Elementi dealer or a qualified bicycle technician. An incorrect wheels installation
can cause serious accidents and injury for the user.
Deda ZERO2DB wheels are pre-assembled from the factory with Thru- axle locking
system (Front 12x100, Rear 12x142). The Thru-axles are not included into the
wheels package.
For thru-axle installation and wheels locking to the frame and fork, read and carefully
follow the installation instructions provided by the bicycle and fork manufacturer.
WARNING: An incorrect installation of the through axle can cause the wheel
separation from the fork and cause serious accidents and injury for the user.
Conversion kit for Quick Release (100 mm Front/ 135 mm Rear) and Thru-axle (TA
15 mm Front) are available as spare parts.
10