Sprockets Installation - Deda Elementi Gera Carbon Use And Maintenance Manual

6. Sprockets installation

Deda Elementi wheels are available with
Shimano® 10-11-12 speed, Sram® 10-11-12 speed
and Campagnolo® 10-11-12-13 speed cassette.
Read and carefully follow the installation
instructions of the sprockets. The rear wheel
with Shimano® freehub body is supplied with
a 1.80mm aluminum spacer that is intended
to be used with Shimano® /Sram® 10 speed
cassette only . Please don't use 1.80mm spacer
with 11 and 12 speed cassette. Sram 12 speed
groupset requires the use of the XDR freehub
body compatible, available as spare part (part.
No. WD17XDRSL). Campagnolo 13 speed
groupset requires the use of the N3W freehub
body compatible, available as spare part (part.
No. WD18DBN3W).
↓ Wheel Type
Shimano
Sram
Campagnolo
↓ Notes
* with XD-R freehub body
** with N3W freehub body
Warning:
Since specific tools and experience are
necessary for proper sprockets installation,
in case of doubts it is recommended that the
product will be installed by an official Deda
Elementi dealer or a qualified bicycle technician.
An incorrect sprockets installation can cause
serious accidents and injury for the user.
↓ Freehub Cassette Compatibility
-
Sram 12v*
Campagnolo 12v
Campagnolo 13v**
Shimano 11v
Sram 11v
Campagnolo 11v
Warning:
Please make sure that wheel freehub body will be
compatible with your sprockets cassette before
proceed with the assembly. The ensure missing
of the compatibility between wheel and sprockets
cassette can cause malfunction of the bicycle
drive train causing serious accident and injury
for the user.
Shimano 10v
+ dist. 1.80mm
Sram 10v
+ dist. 1.80mm
Campagnolo 10v
dedaelementi.com