Table of Contents
Advertisement
Available languages
Available languages
6. Garmin® Mount Installation
1. Remove the nylon Deda Cover (15) for non-Garmin® users unscrewing the two screws.
2. Insert the Garmin® mount (14) and fix it to the handlebar with the same two screws.
Tighten the bolts starting with a suggested minimum torque of 3 Nm.
3. Check that the Garmin® mount has been correctly fixed before using your Garmin® computer.
This model is compatible with 500, 800 and series.
Alanera Integrated Handlebar
25
Advertisement
Table of Contents
