Beckhoff KL3403 Series Documentation page 28

Mounting and wiring
Terminal housing
Wire size width (single core wires)
Wire size width (fine-wire conductors)
Wire size width (conductors with a wire end sleeve)
Wire stripping length
High Density Terminals (HD Terminals [} 26]) with 16 terminal points
The conductors of the HD Terminals are connected without tools for single-wire conductors using the direct
plug-in technique, i.e. after stripping the wire is simply plugged into the terminal point. The cables are
released, as usual, using the contact release with the aid of a screwdriver. See the following table for the
suitable wire size width.
Terminal housing
Wire size width (single core wires)
Wire size width (fine-wire conductors)
Wire size width (conductors with a wire end sleeve)
Wire size width (ultrasonically "bonded" conductors) only 1.5 mm
Wire stripping length
28
ELxxxx, KLxxxx
0.08 ... 2.5 mm
0.08 ... 2.5 mm
0.14 ... 1.5 mm
8 ... 9 mm
High Density Housing
0.08 ... 1.5 mm
0.25 ... 1.5 mm
0.14 ... 0.75 mm
8 ... 9 mm
Version: 3.1.0
ESxxxx, KSxxxx
2
0.08 ... 2.5 mm
2
0,08 ... 2.5 mm
2
0.14 ... 1.5 mm
9 ... 10 mm
2
2
2
2
2
2
2
KL3403