40
Figure 47 shows the Results screen. Similar to Cyclic Top measurements, you can choose to plot
Track gauge, Super elevation or Twist over 3 metres. Choose the recording by clicking on the name
and press "Plot" to see the recording graphically. This will also show the events that were added
during the recording.
STEP 6: Opening CSV report
Pressing
"CSV
report" button on Figure 47 will create a tabulated version of the recorded results.
Figure 48 shows an example of such a report. The user is able to view the position at which faults,
such as Gauge and twist faults occurred.
Figure 48 – CSV Report