Advertisement
9.0
Before going on track
9.1
Check Battery Levels
The CTMD has two removable batteries which are accessed from the lid in the top of the
Measurement Device. Press the battery indicator button to check the charge of the batteries and
charge them if necessary, you can also see the battery voltage in the start a recording screen.
Check the battery levels on the Panasonic FZ-G1 Tablet by clicking on the battery icon bottom right
of the tablet.
9.2
Check Wireless Connection
Switch on the CTMD and 'Cyclic Top' should appear in the list of wireless networks available and
windows should automatically connect to it. Open the CTMD software on the Windows tablet and
click 'Connect via Wi-Fi' to check that the connection is working between the tablet and the trolley.
Figure 14 - CTMD Software Home Screen
9.3 Before Each Use
The following checks should be carried out in the office or depot before taking the trolley onto the
track.
The condition of the trolley should be checked by the operator before it is used. The trolley
must be in good condition with no loose or broken components.
The trolley must be marked with a valid calibration sticker showing the next annual due date
located inside of the battery compartment. The trolley should not be used after the
calibration due date.
15
Advertisement
