Advertisement
18
10.0 Step by Step Guide to Recording Cyclic Top Measurements
on Track
STEP 1. Put the CTMD on the track
The CTMD should be positioned near to the cyclic top fault with the fixed side (marked L) on the
left rail, facing the direction of travel of the measurement train.
STEP 2. Connect the Windows device to the CTMD
- Turn on the CTMD and the Windows device.
- Open the CTMD software to see the home screen.
- Click
'Connect to
Wi-Fi' in the top left corner of the screen.
- The trolley begins to send real time data to the Windows device. The Gauge, Cant/SE are
displayed below the 'Connect to Wi-Fi' button, but they are not recorded.
Figure 16 - CTMD Software Connecting
Advertisement
