Advertisement
31
12.0 Track Repairs
12.1
'Repair Track' Screen
- The CTMD software makes recommendations for the lift required in track repair. The top graph
shows the profile of the
Rail
height, the middle graph shows the position and
Cycle depth
of the
identified cycles & the lower graph shows the
recommended
lift.
- In the top graph, the recommended rail height is shown in one colour (blue in the example shown) as
well as the recommended rail height and the recommended repair height. The recommended repair
height may be higher than the recommended rail height based on the overlift selected by the user.
- The user can click 'Increase' or 'Decrease' to change the 'Overlift'.
Figure 34 - Repair Track
- The recommended rail height and recommended lift height are based on measurements that do not
include voiding. Use of void meters can help to determine the amount of overlift required – the user is
warned of this by a notification window.
Advertisement
