Advertisement
22
At any point whilst recording you can add predefined events such as Signal, Crack, Bridge etc. as
well as custom events which may happen during the recording. These buttons are positioned on
the right hand side of the screen below. CTMD software will record the position of the event and
the type of event when such a button is pressed. Pressing the "Type in an event" button will open
a window as shown below where you are able to type a custom event name and add it to the
recording. Please be aware that if you stop the trolley completely it will automatically end
measurement, we recommend you keep moving the trolley very slowly when adding a specific
event.
Figure 21 Adding events
Advertisement
