Abtus ABT-7000 Instruction Manual page 37

STEP 4: Start Geometry Recording
Once the CTMD is ready to start a recording, press the "Set Zero Position" to reset the position
reading to zero.
Figure 43 Setting zero position
Press "Geometry Recording" to open the window shown in Figure XX.
- Input the Operator name.
- Input the Filename.
- Click 'Start recording'
The other fields in the window are optional. The "Counting" can be "Up" or "Down" depending on the
direction of travel and will change the on-screen position of the trolley when it is moved.
37