Vents VUT 300 V2 MINI EC A2 User Manual page 11

1. Press out on the latches. Open and remove the service panel. Undo the screws securing the latches and remove them.
2. Remove four hand screws and take off the suspension brackets. Then unscrew six fixing screws from the back panel and remove the
panel. Install the back panel on the opposite side of the unit.
3. Install the latches and the service panel on the opposite side of the unit.
Service side change is shown by the example of the VUT/VUE 300 V2 mini EC air handling unit.
The procedure of the service side changing for the VUT/VUE 300 H2 mini EC unit is carried out in the same manner.
11
www.ventilation-system.com