Printronix ProLine 5 Series Manual page 77

Ignore Character
Ignore Mode
This parameter instructs the PGL to ignore the character selected under the
Select Character menu.
Disable. The PGL does not ignore any characters.
Enable. The PGL ignores the characters selected under the Selected
Character menu.
Select Character
This instructs the PGL which character to ignore from the host.
Compatibility Mode
This option instructs the PGL to behave similarly to older versions of the IGP with
respect to certain commands.
All new users with new applications should select the "None" option. Selecting
this mode insures the printer will behave as described in this manual.
When replacing an older product operating with an existing application, especially
those using the PMODE and SMODE commands, a compatibility mode may
need to be selected. In this case, select the printer model number option that
most closely matches the printer being replaced.
Expanded Font
This option defines the type of expanded characters the PGL will select.
Scalable. These expanded characters have rounded edges.
Block. These are block characters compatible with the IGP–X00 printers.
Alt Block 1 / Alt Block 2. Reserved block sets used only for
compatibility purposes.
4–24 Configuration Menus