KYOWA WGA-910A Series Instruction Manual page 9

1. OUTLINE OF PRODUCT
The WGA-910A-4 is instrumentation amplifier with the CC-Link options.
This product is able to control devices and able to load indicated values by using a PLC (or sequencer).
2. CONTROLS AND INDICATORS (REAR PANEL)
(1)
(1) Communication
connectors
(2) Status LEDs
3. CC-Link SPECIFICATIONS
Version
Station type
Number of occupied stations
Communication speed
Station number
Connection cable
4. COMMUNICATION CONNECTORS
The pins and signals are as follows.
Pin No. Signal name
1
2
3
4
5
Connects the CC-Link cable for the PLC.
For details, see "4. COMMUNICATION CONNECTORS."
Indicates the communication status. For details, see "5. STATUS LED."
Ver.1.10
Remote device station
1 station, 2 stations, 4 stations
10 Mbps, 5 Mbps, 2.5 Mbps, 625 kbps, 156 kbps
1 to 64
Cables applicable to the CC-Link Ver.1.10
(3-conductor shielded twisted-pair cable)
Signal content
DA Signal conductor DA
DB Signal conductor DB
DG Signal conductor ground
SLD Shield
FG Frame ground
Specifications
The SLD and FG are connected internally.
7
(2)
Initial values
4 stations
10 Mbps
1 stations
Remarks