KYOWA WGA-910A Series Instruction Manual page 16

Command data (Clock 2): 32 bits BCD
Buffer address (Station number: 1, Number of occupied stations: 4 stations): 01EC
Write the pre-set values of the Clock 2 (Hour, Minute, Second) by using the [Command processing request 2].
MSB
1
L Minute (10 th digit) 4 bits Minute (10
H All "0"
Indicate the digits in the same manner as that of the BCD data.
Example: Pre-set data of Clock 2 (Hour, Minute, Second): "231459"
Command No. 16 bits BCD
Buffer address (Station number: 1, Number of occupied stations: 4 stations): 01EE
Selects the command No. The [Command processing response 2 flag] does not appear when the command is
invalid.
MSB
10 3 th digit
Example: Command Number of the sensitivity registering calibration: "2003"
Measureing Condition (Operation pattern): 4 bits BCD
Buffer address (Station number: 1, Number of occupied stations: 4 stations): 01EF
Selects the Measureing Condition (operation pattern) No.
MSB
All "0" 4 bits
Indicate the digits in the same manner as that of the BCD data.
Example: Pre-set data: "32" (Measureing Condition No. 32) →
0
th digit) 4 bits Second (10
4 bits All "0"
0001 0100 0101 1001 (Upper row: 16 bits BCD of the L)
0000 0000 0010 0011 (Lower row: 16 bits BCD of the H)
4 bits 10 2 th digit
0010 0000 0000 0011 (16 bits BCD)
All "0"
0000 0000 0011 0010 (16 bits BCD of the upper row)
1
th digit) 4 bits Second (10
4 bits Hour (10 1 th digit) 4 bits
4 bits 10 1 th digit
1
4 bits 10 th digit
14
to 01ED
H H
0
th digit) 4 bits
Hour (10 0 th digit) 4bits
H
4 bits 10 0 th digit
H
0
4 bits 10 th digit
LSB
LSB
4 bits
LSB
4 bits