KYOWA WGA-910A Series Instruction Manual page 11

6. CC-Link SETTINGS
6-1. Number of occupied stations
Sets the number of occupied stations as the remote device station.
<Setting Range>
1 station, 2 stations, 4 stations.
<How to operate>
1) Press the
CC-Link Setting
2) Press the
Occupied Stations
3) Press the target key and
key on the "Option Setting" window.
key on the "CC-Link Setting" window.
key to register the target value.
Register
Option Setting
CC-Link Setting
Occupied Stations
Push the target key and 'Register' key.
9
Return
'Communication Speed','Trans-
Com.Setting
mission Mode'and 'Device ID'
of RS-232C/485 are set.
'Transmission Speed',logic of
BCD Output Setting
each output,and 'BCD Classifi-
cation are set.
'Zero Dsp.'(0V) or 'Full Dsp.'
D/A Output Setting
(10V),and 'D/A Classifica-
tion' are set.
'The Number of Occupied
CC-Link Setting
Stations','Transmission Speed'
and 'Station Number' are set.
Return
'The Number of Occupied
Occupied Stations
Stations' is set.
4 stations
'Communiction Speed' is set
Communiction Speed
for CC-Link.
10 Mbps
'Station Number' is set.
Station Number
1
1.00
CC-Link Firmware Ver.
Return
Now
New 2 stations
4 stations
1 station 2 stations
4 stations
Measure
Measure
Measure
Register