GE Mini Telemetry Operation And Maintenance Manual page 25

This section describes all controls, indicators and connectors on a Mini Telemetry System.
Transmitter
Oblique View
The following table describes the components of the Transmitter front panel:
Component
© 2010 by General Electric Company. All rights reserved.
Chapter 3: Mini Telemetry Components
Description
1. Display:
A display to show the charge status of battery, volume,
connectors connectivity, Channel number and mark
key.
2. Mark Key:
When the Mark key is pressed, one of the following
mark prints (depending on the type and/or setting of
the Corometrics monitor) on the strip chart paper of
Corometrics monitor:
• : The event marker is commonly used to
record an "event." This mark is available on all
Corometrics brand monitors.
• : The fetal movement marker (default setting)
is commonly used as an indication that the
mother has perceived fetal movement. (Refer
to your monitor's operator's manual to learn if
your monitor supports this feature. Refer to your
monitor's service manual for information about
enabling the option.)
The event marker is displayed on the transmitter
display as long as the Mark key is pressed.
NOTE: Mark key functionality will work only if atleast
one transducer is connected to the transmitter.
2049809-001 Rev B
11