Important Safety Information - Raven AccuBoom Calibration & Operation Manual

CHAPTER
1
CHEMICAL AND AGRICULTURAL PRODUCT SAFETY
• Thoroughly bleed the nurse tank hose and all other system lines prior to disassembling the flow meter, fittings
and hoses, especially in the case of anhydrous ammonia (NH
• Follow all label instructions for proper chemical mixing, handling and container disposal methods.
Read this manual and the operation and safety instructions included with the implement and/or controller
carefully before installing and operating the AccuBoom™ system.
• Follow all safety information presented within this manual.
• Contact a local Raven dealer for additional assistance with any portion of the installation, service, or operation
of Raven equipment or components.
• Follow all safety labels affixed to the AccuBoom components. Be sure to keep safety labels in good condition
and replace any missing or damaged labels. To obtain replacement safety labels, contact a local Raven dealer.
When operating the machine after installing AccuBoom, observe the following safety measures:
• Be alert and aware of surroundings at all times during equipment operation.
• Do not operate AccuBoom or any agricultural equipment while under the influence of alcohol or an illegal
substance.
• Remain in the operator position at all times when AccuBoom is enabled.
• Turn the AccuBoom feature off when leaving the operator position or exiting the implement cabin.
• Do not drive the implement on any public road with the AccuBoom feature on or enabled.
• Determine and maintain a safe working distance from bystanders and any hazards. The operator is responsible
for disabling AccuBoom when the safe working distance has been diminished.
• Disable the AccuBoom feature prior to starting any maintenance work on the implement or machine.
Manual No. 016-1001-087 Rev. E
I MPORTANT SAFETY
C H A P T E R 1
INFORMATION
DANGER
3
NOTICE
CAUTION
) application systems.
1