Set Quick Charging Mode; Set Usb Debug; Set Usb Device Read-Only Mode; Set System Language - HIKVISION DS-MH2311C Series User Manual

5.14 Set Quick Charging Mode

Tap Settings → System → Quick Charging Mode to enable or disable the function. It is enabled by
default. In quick charging mode, all the power consuming functions, such as network, record,
positioning, etc., will be disabled automatically.

5.15 Set USB Debug

If you want to view the debug log, enable USB debug mode.
Steps
1. Tap Settings → System → USB Debug .
2. Select Enable or Disable.

5.16 Set USB Device Read-Only Mode

After switching to USB mode, you can set USB device read-only mode to allow the video, audio,
and picture files readable only.
Steps
1. Tap Settings → System → USB Device Read-Only .
2. Select Enable or Disable.
Enable
After switching to USB mode, the video, audio, and picture files can only be read, and cannot
be written.
Disable
After switching to USB mode, the video, audio, and picture files can be read and written.

5.17 Set System Language

You can select system language.
Steps
1. Tap Settings → System → Language .
2. Select language according to your needs.
Body Camera User Manual
14