System Settings; Set Positioning - HIKVISION DS-MH2311C Series User Manual

2. Check Enable.
3. Set platform parameters.
IP
The IP address of the platform server.
Port
The port of the platform.
Device ID
The unique identification of the device. It should be the same with the ID entered when
adding device via platform.
4. Optional: Enter GPS Upload Interval.
The GPS information will be uploaded to the platform according to the set interval.
Note
Reboot the device to take the settings into effect.
5. Click Save.
Result
You can view the platform connection status on the device notification center. When
means the platform has been connected.

8.6 System Settings

8.6.1 Set Positioning

You can enable positioning to record the specific locations of the events to guarantee the
completeness and availability of the evidences.
Steps
1. Click Device Configuration → System Settings .
2. Select positioning mode from Positioning Settings.
3. Click Save.
Note
If positioning failed, move the device to a wide place to guarantee the positioning signal can be
received.
Body Camera User Manual
23
appears, it