Chapter 5 System Settings; Set Positioning; Enable Indicator; Enable Ir Light - HIKVISION DS-MH2311C Series User Manual

5.1 Set Positioning

You can set positioning to locate the position of the device.
Steps
1. Tap Settings → Network → Positioning Service .
2. Enable Positioning Service.
3. Select Mode.
Note
If you switch the positioning mode, it will take effect after rebooting positioning service.
4. Optional: Tap Settings → System → GPS Overlay to enable GPS overlay.
Result
The positioning information will be overlaid on the live view image.

5.2 Enable Indicator

Enable indicator to indicate the device status.
Steps
1. Tap Settings → System → Indicator .
2. Select Enable.
Note
Refer to "Quick Start Guide" for the indicator status and colors.

5.3 Enable IR Light

You can enable IR light to supplement light for record at night or in dim environment.
Steps
1. Tap Settings → System → IR Switch .
2. Select Disable, Enable, or Auto according to the actual needs.
Body Camera User Manual

Chapter 5 System Settings

9