Set Operation Password; Set Led Indicator; Set Gps Time Synchronization - HIKVISION DS-MH2311C Series User Manual

3. Click Save.

8.6.5 Set Operation Password

You can enable or disable password verification.
Steps
1. Click Device Configuration → System Settings .
2. Set Operation Password.
Open
You need to enter device password to verify when you format device storage, restore default
parameters, restore to factory settings. etc.
Close
Password verification is not required.
3. Click Save.

8.6.6 Set LED Indicator

Enable LED indicator if you need to judge the device status via indicators.
Steps
1. Click Device Configuration → System Settings .
2. Set LED Light.
3. Click Save.
Result
If the function is enabled, LED indicators will show different colors in various status. Refer to the
quick start guide for details.

8.6.7 Set GPS Time Synchronization

If GPS is enabled, the device can synchronize time with the GPS time.
Before You Start
Enable GPS. Refer to "Set Positioning" for details.
Steps
1. Click Device Configuration → System Settings .
2. Set GPS Synchrony.
3. Click Save.
Body Camera User Manual
25