CODELOCKS KitLock KL1100 Manual page 8

Additional locks can be added to existing Lock Groups:
Add
additional
1. Sign into Portal - navigate to Remote Card Authorisation > Lock
locks to an
existing
2. Select the Lock Group that you would like to add new locks
group
3. If you chose to not have the Portal remember the Lock Group ID,
4. Enter the starting Lock ID - this must be an integer value. The
5. Enter the number of locks that you will initialise
6. Click Save & Commit
7. Open your Codelocks Card Manager Client software (on your
8. From the list of available actions, select the "Add Locks to Lock
9. In the CCMC software, click "Apply" - once the information has
TO INITIALISE THE LOCKS, REFER TO
Groups
enter the Lock Group ID manually
first lock to be initialised will be assigned this ID. After the first
lock to be initialised, the next lock will be initialised with an
incremented ID and so on.
1. Note: Check that you use a consecutive ID from the end
of the existing group
1. Note: This value must be accurate otherwise you will
may not be able to correctly add locks to cards
PC), place a MIFARE card on the USB card reader
Group" action
been written to the card, a confirmation message will be
displayed and you will be able to use the card to enable RCA on
the respective locks.
1. Note: This Initialisation Card must be kept secure and/or
destroyed after use. This card is NOT the same as a
Master Card.
Lock Initialisation.