CODELOCKS KitLock KL1200 Installation Instructions

Hide thumbs Also See for KitLock KL1200:

Download this manual

Codelocks Support

KL1200 - Vertical installation Instructions

Special Notes

Please read carefully:

• Before installing the lock, load the batteries and familiarise yourself with the operation and programming.

• The handle will not turn until you enter the factory default Master Code 11 33 55 77 or the User Code 22 44.

• Please see Programming Guide to set your new Master and User Codes and to set different functions on lock if

required.

Fitting Instructions

The KitLock can be fitted to:

A Cabinets, cupboards and lockers etc as a direct replacement for existing cam locks.

B It can also be fitted easily to cupboards and cabinets that do not have an existing locking device.

https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1200-vertical-installation-instructions

Need help?

Do you have a question about the KitLock KL1200 and is the answer not in the manual?

Page 1 Codelocks Support KL1200 - Vertical installation Instructions Special Notes Please read carefully: • Before installing the lock, load the batteries and familiarise yourself with the operation and programming. • The handle will not turn until you enter the factory default Master Code 11 33 55 77 or the User Code 22 44.
Page 2 https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1200-vertical-installation-instructions...
Page 3 https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1200-vertical-installation-instructions...
Page 4 IMPORTANT NOTE: Before drilling fixing holes, please ensure the position of the KitLock when fitted will allow enough clearance for selected cam to work. Step 2 Drill all three fixing holes. Step 3 Continue installation from step 4 to 7 from the Installation Guide section A). https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1200-vertical-installation-instructions...