CODELOCKS KitLock KL1100 Manual page 10

1. Sign into Portal - navigate to Remote Card Authorisation >
Card
authorisation
2. Select card type (User, Technician or Master)
3. Select the locks or lock groups that you want to authorise access
4. Select card expiry date
5. Select access pattern
6. If you chose to not have the Portal remember the Lock Group
7. Click Save & Commit
8. Open your Codelocks Card Manager Client software (on your
9. From the list of available actions, select the "Authorise Card"
10. In the CCMC software, click "Apply" - once the information has
1. Touch the Initialisation Card to the lock
Lock
Initialisation
2. A double flash indicates success
Authorise Card
1. User: Can be permitted access to any lock or lock group
selected
2. Technician: Can permitted access to any lock or lock
group selected. After use on a locked Public Mode lock,
lock will return to a locked state.
3. Master: Can be permitted access to any lock or lock
group selected. Can also be used to transfer new
settings to a lock.
to
1. Days of the week (MO to SU)
1. Hours of the day on each of the days (00 to
23:59)
IDs, enter the Lock Group IDs manually against each Lock
Group
PC), place a MIFARE card on the USB card reader
action
been written to the card, a confirmation message will be
displayed.
1. The CCMC software will include the UID of the new card
in the Status Update Response
1. Note: An Initialisation Card cannot be used on a lock
that has already been initialised. The lock must be
factory reset before it can be re-initialised.
2. Note: Initialisation sets all lock details including the lock
ID