CODELOCKS KitLock KL1100 Manual page 3

Note: The Codelocks Keypad Accessory Unit is required for this function
Add/Remove
Technician
1. Plug the Codelocks Keypad Accessory Unit into the lock
Cards (Local)
2. Touch Master User Card to lock
3. Press # • 04 •• on the keypad
4. Within 5 seconds, touch Technician User Card to lock
5. Once complete, wait 5 seconds and the lock will return to public
Note: Presenting the Master User Card to the lock will open the lock and
remove any User Cards
Perform factory reset
Change
Master Card
or with the optional Codelocks Keypad Accessory Unit:
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch Master User Card to lock
3. On the keypad, enter:
4. Touch new Master User Card to lock
Perform factory reset
Remove all
Technician
or with the optional Codelocks Keypad Accessory Unit:
Cards (Local)
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch Master User Card to lock
3. On the keypad, enter:
Note: The Codelocks Keypad Accessory Unit is required for this function
Re-lock
Delay
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch the Master User Card to the lock
3. On the keypad, enter:
1. If the Technician User Card already exists, it will be
removed
2. If the Technician User Card does not exist, it will be
added (maximum of 10)
use
1. Press # • 01 • 01 ••
1. Press # • 05 • 05 ••
1. Press # • 06 • Time <02-30> ••