Table of Contents
Advertisement
Quick Links
KA-01088 ꞏ Customer Self-Service
Home (/) > Knowledge Base - Home (/knowledgebase/) > KA-01088
The KitLock is a smart card locker lock and supports MIFARE based smart cards. Public and Private function
are available. When the lock is first powered, it will require initialisation.
Penalty Time
Touching an unregistered card 3 times will incur a 10 second time delay before any further use is possible.
Batteries
The KitLock uses 2x AAA 1.5v batteries. Always use high quality batteries and dispose of old batteries
according to local authority recommendations.
When battery power is low, the Red LED will flash 3 times before any unlocking. Batteries should be change
as soon as this happens.
During initialisation, select the most appropriate function for the application: Private Use or Public Use.
Private Use
This function is used when the lock is to be used by the same pre-registered users. Up to 50 individual User
Cards can be registered.
Public Use
1 of 6
https://support.codelocks.com/knowledgebase/article/KA-01088/en-us
Prin
Views: 1
6/22/2018 11:31 AM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CODELOCKS KL1050
Summary of Contents for CODELOCKS KL1050
- Page 1 KA-01088 ꞏ Customer Self-Service https://support.codelocks.com/knowledgebase/article/KA-01088/en-us Home (/) > Knowledge Base - Home (/knowledgebase/) > KA-01088 Prin Views: 1 The KitLock is a smart card locker lock and supports MIFARE based smart cards. Public and Private function are available. When the lock is first powered, it will require initialisation.
- Page 2 KA-01088 ꞏ Customer Self-Service https://support.codelocks.com/knowledgebase/article/KA-01088/en-us The user touches a compatible card to an available lock. This locks the lock and only that card can be used unlock the lock 1. This function is used for short-term, multi-occupancy applications. Master User Cards and Technician Cards can always be used to unlock public use locks.
- Page 3 KA-01088 ꞏ Customer Self-Service https://support.codelocks.com/knowledgebase/article/KA-01088/en-us This card is now your Master User Card. Within 10 seconds of registering the Master User Card, touch a second compatible. card to the front the lock. The Blue LED will flash to confirm card acceptance. This card is now your Technician Card an the lock will go into Public Function.
- Page 4 KA-01088 ꞏ Customer Self-Service https://support.codelocks.com/knowledgebase/article/KA-01088/en-us Enable Public Pairing Public pairing prevents a User Card that has been used to lock one lock from being able to be used to lock additional locks whilst it is paired with the original lock.
- Page 5 POI-KL1050-v1:1216 © 2018 Codelocks Ltd. All rights reserved. Keywords: Fact Sheet KL1050 1050 Lock Locks Kit Kitlock Kitlocker Locker Program Programming Instruction Instruct Help Support Troubleshoot Troubleshooting Sequence Sequences Install Installation Parameters Settings Setting Parameter 5 of 6...
- Page 6 KA-01088 ꞏ Customer Self-Service https://support.codelocks.com/knowledgebase/article/KA-01088/en-us 6 of 6 6/22/2018 11:31 AM...
Need help?
Do you have a question about the KL1050 and is the answer not in the manual?
Questions and answers