Comfee MPPDB-12HRN7-QB6G1 Instruction Manual page 37

Installation
Part Description
Unit Adaptor
Exhaust Hose
Window Slider Adaptor
Wall Exhaust Adaptor A
(only for wall installation)
Wall Exhaust Adaptor B(with cap)
(only for wall installation)
Screw and anchor
(only for wall installation)
Window Slider A
Window Slider B
Power Cord Buckle
NOTE: Items with
Window Installation Kit
Step One: Preparing the Exhaust Hose assembly
Press the exhaust hose into the window slider adaptor
and unit adaptor, clamp automatically by elastic buckles
of the adaptors.
Step Two: Install the Exhaust hose assembly to the unit
Insert unit adaptor of the Exhaust hose assembly into the
lower groove of the air outlet of the unit while the hook of
the adaptor is aligned with the hole seat of the air outlet
and slide down the Exhaust hose assembly along the arrow
direction for installation.
Step Three: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size of the
window slider.
2. If the length of the window requires two window sliders, use the bolt
to fasten the window sliders once they are adjusted to the proper
length.
3. For some models, if the length of the window requires three window
sliders(optional), use two bolts to fasten the window sliders once they
are adjusted to proper length.
Quantity
1 pc
1 pc
1 pc
1 pc
1 pc
4 set
1 pc
1 pc
1 pc
are optional. Slight variations in design may occur.
*
Part
*
Security Bracket and Screw
*
Drain Hose Adaptor(only for
heat pump mode)
*
*
*
Exhaust hose
Press into
Unit adaptor
Make sure the hook of the adaptor is aligned
with the hole seat of the air outlet.
Hook
adaptor
Window slider A
10
EN
Description
Bolt
Drain Hose
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Remote Controller
or
and Battery
Exhaust hose
assembly
Press into
Window slider
adaptor
Hole Seat
Make sure the adaptor is
Lower groove
inserted into the lower
groove of the air outlet.
Bolt
Window slider B
Quantity
1 pc
1 set
1 pc
1 pc
2 pc
2 pc
1 pc
1 set