Precautions Before Use - Xtool Anyscan A30 User Manual

3.2. Sub-menus and Function Buttons
Function Buttons

4. Precautions Before Use

4.1. The vehicle power supply has to meet the normal voltage limits DC 9-12V
4.2. Users should check the position of the DLC port and ensure the OBD 16 connector and the DLC
port are correctly aligned before attempting to connect.
4.3. When carrying out some special functions tests, users are required to operate the device
according to operating instructions. For some tests the vehicle has to meet certain requirements, for
example: engine temperature 80℃/105℃, turn off loads (such as headlights, air-conditioner, etc.),
put accelerator pedal in released position, etc.
4.4. If users can not find the tested vehicle model or electronic control system in the VCI Dongle III test
menu, they may need to update the software or consult Xtool technical service department.
4.5. Before powering off the unit, please ensure that you cancel or complete the current task or
function and return to the main interface, then power off.
4.6. Do not excessive force to operate the touch screen.
Descriptions
Opens the Diagnostic application. It can read
diagnostic information, view live data, perform
actuation tests and special functions etc.
By selecting "Settings", users can access the language
setting and other system related settings.
Click UPDATE after connecting to the internet, you can
then download the latest diagnostic software directly.
Users can view all the diagnostic reports and
diagnostic data generated in the diagnosis process.
More software packages for users to further purchase.
Online Communication Platform for users.
Job sheet.