Performing A Fuel Conversion - IBC EX Series Installation & Operating Manual

6.3.2 Performing a fuel conversion

These boilers are factory fire-tested to operate with natural gas or propane as ordered. The rating
plate will be marked to indicate which fuel the particular boiler has been set up with. Firing a boiler
with a fuel other than what is listed on the rating plate is prohibited unless the conversion procedure
is completed by a qualified technician.
Danger
Operating any IBC boiler using a fuel other than the fuel listed on its rating plate is
prohibited. Failure to follow the instructions on converting to alternate fuels can result in a
fire or explosion, which may cause property damage, personal injury, or loss of life.
Check the rating plate of the boiler to ensure it is configured for the fuel you are using. If
the fuel is incorrect for the appliance, a conversion kit must be ordered from IBC and the
gas valve adjusted accordingly. Failure to perform the required fuel conversion can result
in an immediate hazard.
Fan
Shutoff valve
Manifold gas pressure test port
Inlet gas pressure test port
High pressure switch
6.3.2 Performing a fuel conversion
67