Adam Equipment HIGHLAND HCB 602M Manual page 13

EN
followed by the new total in the memory for 2 seconds before returning to
displaying the weight of the item on the balance.
6) Continue until all weights have been added.
To view the totals in memory press the [Print] key when the balance is at zero. The
display will show ACC xx (where "xx" is the total number of readings) and the total
weight, before returning to zero. At the same time the total will also be sent via the
RS‐232 interface.
To clear the memory, press [Smpl] once the total accumulation value is displayed
after pressing [Print].
© Adam Equipment Company 2018
13