Cleaning The Nozzle - Bissell PROHEAT 2X REVOLUTION DELUXE User Manual

Cleaning Machine After Use
WARNING
disconnect plug from electrical outlet before performing maintenance or troubleshooting.
1
Rinse the Clean Water Tank
with warm tap water. Fill the
tank with warm tap water,
twist the cap on and return
the tank to the machine.
Cleaning the Brush Rolls
1
Turn OFF and unplug the
machine.

Cleaning the Nozzle

1
If pet hair or debris
gets clogged in the
nozzle, turn OFF and
unplug the machine
and use the Nozzle
Clean Out Tool.
3
Hold the nozzle and insert the tool into
the thin slot on the bottom of the nozzle
that touches the floor. Move the tool
around in multiple directions to clean.
12
www.BISSELL.com.au
To reduce the risk of fire, electric shock or injury, turn power OFF and
2
To flush and rinse machine turn it ON and press the Spray
Trigger for 15 seconds while making forward and backward
passes on carpet. Release the trigger and suck up water.
Empty both tanks and let dry before storing. Wipe the
machine's exterior with a soft cloth.
2
Lay the machine down on
its back or side.
3
Use comb to brush
debris from the
Brush Rolls.
2
Remove the nozzle from the foot by
opening the Accessory Hose Door and
lifting the nozzle up and away from the foot.
4
Replace the nozzle by lining up the three
hooks on the nozzle to the bottom of the
foot. Rotate it up and click into place.
Close the Accessory Hose Door.