Bissell PROHEAT 2X REVOLUTION DELUXE User Manual page 9

Cleaning Your Carpet
1
Plug into a properly
earthed outlet.
4
Deep Clean Mode:
Standard Cleaning
1. Press the Spray
Trigger to apply
solution while making
2 slow, wet passes
(1 forward, 1 back).
2. Release the Spray
Trigger.
3. Make 2 slow, dry
passes (1 forward, 1
back) to suck up the
dirty solution. Do
not hold down the
trigger for this step.
NOTICE: To prevent damage to Berber carpets, avoid repeated strokes in
the same area.
2
Select Cleaning Mode:
Deep Clean: Delivers a deep clean
to your carpet.
Dry Time: About 8 hours
Express Clean: Provides a lighter
clean.
Dry Time: Less than 30 minutes
*Choose "Deep Clean" mode
and use BISSELL Wash &
Remove + Antibacterial to deliver
antibacterial benefits.
Using BISSELL® Deep
Clean + Antibacterial
Formula
1. Press the Spray Trigger
to apply solution while
making 3 slow, wet
passes (1 forward,
1 back, and 1 forward
again).
2. Release the trigger.
3. Make 1 slow, dry pass
back to suck up the
dirty solution. Do not
hold down the trigger
for this step.
3
Press the Power
Switch to turn the
machine ON. To
recline your machine
for use, press the
Recline Pedal with
your foot.
Express Clean Mode:
Recommended Cleaning
Pace: 30.5cm/s
1. Press the Spray Trigger
to apply solution while
making 2 wet passes
(1 forward, 1 back).
2. Release the Spray Trigger.
3. Make 2 dry passes (1
forward, 1 back) to suck
up the dirty solution.
Do not hold down the
trigger for this step.
www.BISSELL.com.au
9