Cleaning The Nozzle - Bissell PROHEAT 2X REVOLUTION 1548 Series User Manual

Cleaning Machine After Use
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
1
Rinse the Clean Water Tank
with warm tap water. Fill
the tank with warm tap
water, twist the cap on
and return the tank to the
machine.

Cleaning the Nozzle

1
If pet hair or debris
become clogged in
the nozzle, it can be
cleaned out of the
nozzle with the Nozzle
Clean Out Tool.
Turn OFF and unplug
the machine.
3
Hold the nozzle and insert the Nozzle
Clean Out Tool into the thin slot at the
front of the nozzle where it touches the
floor. Clean until free of pet hair or debris.
To flush and rinse machine
turn it ON and press
the Spray Trigger for 15
seconds while making
forward and backward
passes on carpet. Release
the trigger and suck up
water.
Remove the nozzle from the foot: flip the
Accessory Hose Door open and lift up on
the nozzle and Accessory Hose Door.
4
Return the nozzle back
to the foot of the
machine. Line up the
three hooks on the
nozzle to the bottom of
the foot (see arrows for location).
Rotate the nozzle up and click into place.
Close the Accessory Hose Door.
See page 14 to clean the
Dirty Water Tank from
the water that was just
sucked up. Empty the
Clean Water Tank and let
dry before storing. Wipe
your machine's exterior
with a soft cloth.
2
www.BISSELL.com
15