Bissell PROHEAT 2X REVOLUTION DELUXE User Manual page 8

Filling Your Clean Water Tank:
2X Concentrated Formula
1
3
Unscrew the cap from the Clean Water Tank. Add
warm tap water to the water fill line. Next, reference
the chart below for formula addition to the tank. After
formula is added, secure the tank cap in place.
FORMULA FILLING
INSTRUCTIONS
BISSELL® 2X
Concentrated Formulas
NOTE: Fill with warm (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK
IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution with other
household cleaning products.
Pour in more power with BISSELL Oxy Boost
• Fill tank with water and 2X formula (Step 3 above).
• Add 60 mL of BISSELL Oxy Boost per 3.7 L of water.
• The ProHeat® 2X Revolution® has a 3.7 L Clean Water Tank.
NOTICE: Do not overwet carpet. Be careful not to run over loose objects or edges of
area rugs. Stalling the brush may result in premature belt failure.
8
www.BISSELL.com.au
Clean Water Tank
(3.7 Litre)
Dirty Water Tank
The Clean Water Tank is at
the top of the machine.
DEEP CLEAN MODE
Fill water to the Water Fill
Line, then add 74 mL of
formula.
2
Lift the Clean Water Tank
straight up to remove from
the machine.
4
At the bottom of the
Upper Handle, align the
Clean Water Tank with the
grooves and slide the tank
into place.
EXPRESS CLEAN MODE
Fill water to the Water Fill
Line, then add 37 mL of
formula.