Bissell PROHEAT 2X REVOLUTION DELUXE User Manual page 10

Cleaning Area Rugs
IMPORTANT: Please check manufacturer's tag before cleaning area rugs for any
specialized cleaning instructions. We do not recommend deep cleaning delicate, silk,
wool, antique, or area rugs without a manufacturer's tag.
Regularly clean your high-traffic area rugs in Express Clean Mode:
» Check the manufacturer's tag.
» Select Express Clean Mode.
» When cleaning area rugs, place the rug on a sealed surface to test for colorfastness in
an inconspicuous area. Your cleaner should not be used on unsealed surfaces.
» Important: Keep the foot of the deep cleaner perpendicular to the rug's edge with each
cleaning pass to prevent damage.
Cleaning with Hose and Tool
» Keep hair, loose clothing, fingers, and all parts of body away from openings and
moving parts.
» The Brush Roll continues to turn while product is turned on and handle is in upright
position. To avoid damage to carpet, rugs, furniture, and flooring, avoid tipping
cleaner or setting it on furniture, fringed area rugs or carpeted stairs during tool use.
» With Brush Roll on, do not allow cleaner to sit in one location for an extended period
of time, as damage to floor can result.
1
Lift the Accessory Hose Door on top of
foot on the front of the machine. The
door flips toward the machine to open.
3
Attach the tool to the
end of the hose. (Tools
may vary by model.)
Press the Power Switch
to turn machine ON.
10
www.BISSELL.com.au
2
Insert the hose and snap into place.
Be sure the colored hose release clip
is facing out, away from machine.
4
Press the Spray Trigger button to spray the soiled area,
then slowly move tool back and forth over the area.
Release the trigger to suck up the dirty solution. Work in
small sections until the area is clean.
When finished cleaning, turn the machine ON to suction
up warm clean water to rinse the inside of the hose and
tool. Detach the hose and tool and close the Accessory
Hose Door. Let the hose and tool air dry before storing.