» If your appliance has a motorised Brush Roll, do not leave machine running in the same spot without the handle fully upright. » To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result. www.BISSELL.com.au...
Thanks for buying a BISSELL® deep cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want your deep cleaner to work like new for the years to come, so this guide has tips on how to use, maintain and, if there’s a problem, troubleshoot.
Belt/Brush Access Plate (3.7 Litre Capacity) 14 EdgeSweep Brushes Power Switch Carry Handle Float Stack 16 Rubber Tab Dirty Water Tank (on Dirty Water Tank) Belt Access Door Cable Quick Release Foot Recline Pedal Spray Trigger 10 Power Cable Clip www.BISSELL.com.au...
Page 5
Upper Handle, align the screwdriver, secure the Wrap the cable around Clean Water Tank with Carry Handle with the the Carry Handle and the grooves and slide screw that’s taped to the Cable Quick Release. the tank into place. Upper Handle. www.BISSELL.com.au...
Protector Protector Protector ONLY BISSELL Wash & Protect formulas protect from future stains with Scotchgard Protector. Scotchgard is a trademark of 3M. Certain trademarks used under license from The Procter & Gamble Company or its affiliates Helpful Cleaning Tips Before Cleaning After Cleaning »...
Page 7
A few notes about filling the Clean Water Tank: • Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. • When using BISSELL Wash & Remove + Antibacterial formula: Only fill your Clean Water Tank with the recommended amount of water and formula to achieve anti-bacterial benefits.
Page 8
NOTE: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution with other household cleaning products.
Page 9
Dry Time: Less than 30 minutes Switch to turn the machine ON. To *Choose “Deep Clean” mode recline your machine and use BISSELL Wash & for use, press the Remove + Antibacterial to deliver Plug into a properly Recline Pedal with antibacterial benefits.
Page 10
Press the Power Switch up warm clean water to rinse the inside of the hose and to turn machine ON. tool. Detach the hose and tool and close the Accessory Hose Door. Let the hose and tool air dry before storing. www.BISSELL.com.au...
Did You Know? aligned, the Float Stack should lock into place. The Float Stack is what prevents Return the ring and your Dirty twist to lock. Water Water Tank from may leak if the ring is overflowing. not fully tightened. www.BISSELL.com.au...
Move the tool foot. Rotate it up and click into place. around in multiple directions to clean. Close the Accessory Hose Door. www.BISSELL.com.au...
Page 13
NOTE: Force must be used to lift the Belt Access Door. There is a small belt and end cap on the other end of the Brush Rolls. That belt needs to wrap around the tooth end of the Brush Rolls and the end cap needs to be secure before re-assembling the machine. www.BISSELL.com.au...
Page 14
Cogged Large Pump Belt around the small metal-toothed pulley. While Place the new belt around both brush wrapped around the pulley, stretch and gears and slide them onto the thin wrap around the nearest brush gear. metal axles. www.BISSELL.com.au...
Nozzle may be clogged from pet Use the Nozzle Clean Out Tool hair or debris. and follow steps on page 12 for “Cleaning the Nozzle”. www.BISSELL.com.au...
Any personal data will be handled pursuant to BISSELL’s Privacy Policy, which can be found at www.BISSELL.eu. Consumer Care If your BISSELL® product should require service or to claim under our limited guarantee, please contact us as follows: Website and Email: Write: www.BISSELL.com.au...
Need help?
Do you have a question about the PROHEAT 2X REVOLUTION DELUXE and is the answer not in the manual?
Questions and answers