Configuration With Chatter Link - Xylem MJK Chatter E-MAIL User Manual

Configuration with Chatter Link

MJK Automation ApS provides a PC-program, Chatter™
Link, as a part of the Chatter™ Data Logger package. You
must use this program to do the initial setup and
configuration of your Chatter™ Data Logger.
You can create a configuration i two different ways:
Use the start wizard, it guides you through some easy steps
to make a basic configuration.
Use the Chatter™ Link to create a new configuration or
modify an existing one manually
The sequence you must follow to get a proper configuration
for a Chatter™ Data Logger is defined in the menu in the left
pane. Start from the top and work your way down towards
the bottom.
You must read the current configuration from
the Chatter™ Data Logger before the menu is
displayed
A dditional inform ation:
Install the Chatter™ Link on your PC
Use the start wizard
Do configuration manually
The start menu provides four choices.
A dditional inform ation:
Open a configuration
RTU wizard
33
e-mail wizard
41
Logged data
142
180
45
44
USERS MANUAL
CHATTER™ DATA LOGGER