Configuration - Xylem Ebro EBI 300 Series User Manual

Configuration

The loggers can be ordered preconfigured. As long as the
measurement hasn´t started yet, it is possible to reconfigure
it any time. The configuration options are, among others:
Measurement interval
Upper temperature limit
Lower temperature limit
Alarm delay
Start delay
Time zone
Language of the PDF-file
You can apply these settings by downloading the free of
charge software Winlog.basic from
and using the software to program the device. Please refer to
its user manual.
Naturally, the loggers are supported by the proprietary
softwares Winlog.light and Winlog.pro as well, enabling the
user to benefit from the advanced options of these programs.
Lastly, the website itself has an online configurator, with
which you can program the devices, too. Therefore a
software installation is not required.
User manual EBI 330
http://www.ebi330.com
V 1.1 Page 7 / 16