Xylem MJK Chatter E-MAIL User Manual page 107

SCADA via GPRS
SCADA via dial up
Additional information:
Recipients explained
Data call interval
Select one of the three call intervals.
Additional information:
Schedule pane
105
Label for call
Select an existing labels or select an empty position in the list and enter a new label.
The label will act as an identifier for this data call, inserted into any e-mail sent from this Instrument Net
input.
telephone number.
One or two IPv4 addresses for the SCADA system.
The address must be in the form like this: 192.168.1.100:5001, the :5001 identifies the
TCP-port at the address 192.168.1.100 where the SCADA system listens for data.
This IPv4 address can be either a public or a private address, depending on the network
you want to access,
If you are using two IPv4 addresses for SCADA via GPRS, you cannot use the SCADA via
dial up function.
One or two telephone numbers for the SCADA system modem. The phone number can be
an international number, +4599999999, or a domestic number, 99999999. The phone
number can not be longer than 32 characters
Select an existing telephone number or select an empty position in the list and enter a new
telephone number
If you are using two telephone numbers for SCADA via dial up, you cannot use the SCADA
via GPRS function.
168
107
USERS MANUAL
CHATTER™ DATA LOGGER