General - Xylem MJK Chatter E-MAIL User Manual

General

Signal name
Select an existing signal name or enter a new signal name.
The signal name will act as an identifier for this input, inserted into any SMS messages and e-mails sent
from this Chatter™ Data Logger
A dditional inform ation:
Signal names explained
Start signal input
Select which input you want to use to detect stormflows. Stormflows will not be recorded if you select
None.
Call on alarm ON
Select between four different alarm call types. If you
select
None, the Chatter™ Data Logger will not make an
alarm call when it detects a stormflow.
On start, the Chatter™ Data Logger will make an alarm
call when it detects a stormflow
On volume limit, the Chatter™ Data Logger will make
an alarm call when it detects a stormflow and the
volume limit is reached
On start and volume limit, the Chatter™ Data Logger
will make an alarm call when it detects a stormflow and
a new alarm call when the volume limit is reached.
The Chatter™ Data Logger will call all entries in the Alarm
call list, starting with the first entry.
Additional information:
Volume limit
Call lists
167
Setting the alarm call list
Call on alarm OFF
Use this window to set the way stormflow detection and
recording will operate.
160
111
57
USERS MANUAL
CHATTER™ DATA LOGGER