Stabilisation Pane - Xylem MJK Chatter E-MAIL User Manual

Stabilisation pane

Turn on sensors before meas [sec.]
The sensors need to stabilise before they make an accurate measurement.
Enter the number of seconds you want the sensor turned on before the measurement is done. Select
between two and 60 seconds, for most applications a time of two seconds will be adequate,
The minimum delay is always two seconds even if you select a delay of less than two seconds.
Use this window to set how long time before a
measurement the sensor should be turned on.
See below for a detailed description of each part in this
pane.
Click an arrow to expand a topic. Click here to expand
all topics now.
133
USERS MANUAL
CHATTER™ DATA LOGGER