Vecow EVS-2000 Series User Manual page 95

4.3.17 Connectivity Configuration
Figure 4-3-17 : Connectivity Settings
CNVi present
[Yes] means CNVi is the active Connectivity Solution,
[No] means CNVi was not discovered.
CNVi Mode
This option configures Connectivity.
[Auto Detection] means that if Discrete solution is discovered it will be enabled
by default. Otherwise Integrated solution (CNVi) will be enabled;
[Disable Integrated] disables Integrated Solution.
NOTE : When CNVi is present, the GPIO pins that are used for radio interface
cannot be assigned to the other native function.
BT Core
This is an option intended to Enable/Disable BT Core in CNVi
BT Audio Offload
This is an option to Enable/Disable BT Audio Offload which enables audio input
from BT device in HFP format to the audio DSP and enables power efficient
audio output to BT device via A2DP format.
This feature only support with Intel(R) Wireless-AX 22560
CoExistence Manager
CoEx Manager mitigates radio coexistence issues between Intel WWAN
(modem) and Intel WLAN (WiFi/BT).
This should be enabled only if both WWAN and WLAN solutions are based on
Intel components.
Discrete Bluetooth Module
SerialIo UART0 needs to be enabled to select BT Module
Advanced settings
Configure ACPI objects for wireless devices
WWAN Configuration
Configure WWAN related options
©Vecow EVS-2000 User Manual BIOS AND DRIVER 88