Table of Contents
Advertisement
D300 Series·User Manual
After login, decoding parameters and functional parameters can be set on the web page of decoder. The
decoder page is shown in the following figure:
Note: The decoder has two Ethernet ports, and the default IP address belongs to different network
segments. When accessing, it is necessary to pay attention whether the interface inserted by the
network cable is corresponding or not: the default IP address of port 1 is 192.168.1.168; the default IP
address of port 2 is 192.168.2.168.
Copyright © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
9
Hide quick links:
Advertisement
Table of Contents
