YASKAWA HV600 Series Installation & Primary Operation page 24

6 Mechanical Installation
Remove the Front Cover
1.
Push in the two tabs on the right side of the IP55/UL Type 12 keypad cover door and pull the door to the left to
open.
NOTICE
door too far, it will fall off.
NOTICE
key cover. If you push the keypad key cover, it will fall off.
A - Tabs
2.
Remove the keypad from the drive.
A - Keypad
3.
Loosen the front cover screw.
24
Damage to Equipment. Do not open the IP55/UL Type 12 keypad cover door too far. If you open the
Damage to Equipment. When the IP55/UL Type 12 keypad cover door is open, do not push the keypad
Figure 6.21 Open the IP55/UL Type 12 Keypad Cover Door
Figure 6.22 Remove the Keypad
Figure 6.23 Loosen the Front Cover Screw
B - Keypad key cover
YASKAWA TOEPC71061732E HV600 Drive Installation & Primary Operation